How To Use A Pneumatic Air Hammer

A Pneumatic air hammer is a remarkably handy configuration device utilized for a variety of complex configuration tasks. This device is used to trim, cut, split, level, shape, or enumerate any concrete or solid surfaces. 

If you have recently purchased a Pneumatic air hammer, here is how one should use it –

Check on the type of work area.

Ensure that the work area you are going to use a Pneumatic air hammer is clear without any dirt or debris. Lay-out the pressurized air pipe containing the compressed air to avoid tripping. Wear protective gear like sunglasses and ear band as this tool will make a lot of noise and make sure not to keep it near flammable material.

Also check this best long barrel air hammer reviews here

Arrange the appropriate Chisel and Bits

Depending on the work’s surface, pick the suitable size and thickness of both bits and chisel from the accessory box. Please make sure the bits and chisels are not blunt, in case sharpen it already to avoid odd results. In case you haven’t received new chisels and bits, purchase them.

Lubricate & Install the Chisel and Bit in Cylinder

For a smooth work, lubricate the bits and chisel with grease or lubricant oils to avoid friction. A new set of accessories require a few drops of lubricants to prevent wear and tear and improve the pneumatic air hammer’s shelf life.

Unlock the retainer spring and install the chisel and bits in the nose of the cylinder. Lock back the retainer spring and make sure the chisel and bits are securely locked in the cylinder and is moving back and forth. Make sure the power supply is turned off while you are doing these steps.

Attach the Pneumatic Air Hammer with the Air Tank containing pressurized air

The pressurized air tanks contain a compressed gas, which should be safe, clean, and regulated air. The first step should be to check on the type of connecter to avoid leakage as the compressed gas containing nitrogen can be inflammable. The pneumatic air hammers use power supply between 100 to 120 psi. Ensure that you don’t exceed more than 180 psi as it may cause bodily harm and bang.

Turn on the Power supply.

Once everything is placed and set in the pneumatic air hammer, its time to turn on the power supply and begin the work. As the air hammer can cause lots of vibration, wear shock absorber gloves as you need to hold the hammer with both your hands. Firmly press the cylinder and handle the hammer with both your hands, turn on the switch, and begin working. Keep your body as stable as possible to work comfortably.

It’s always better to work on the target area at a slant angle so that you can see the work area and have a firm grip over the air hammer. If you are a craftsman or even planning to renovate your home, this is the must-have tool in your tool kit, which is easy to use.

Leave a Reply